Your Full Safety Specialist Provider

For Safe Working Lives

  • Telescopic Spreader Bar 10T

Product Code: D996TSB1103

Telescopic Spreader Bar 10T

$3997.50 inc GST
Increase value Decrease value
Qty in cart: 0

Product Code: D996TSB1103

  • Description
  • Warranty, Return & Exchange Policy
  • Shipping Info

Maxirig Telescopic Lifting Beam / Spreader Bar 

WLL Capacities: 6 Tonne to 50 Tonne

Maxirig Telescopic Spreader Bars are designed for a variety lifting applications including major construction projects. They Lifting Spreader Beams are designed to function as a spreader bar in the 60°, 90° and 120° positions. They can also be used as a lifting beam from the centre lift (lug) position.

Easch Telescopic Spreader Bar is certified to AS4991-2004 and includes a proof load test certificate and MPI welding report. It is also supplied with our factory guarantee of conformance and workmanship.

NOTE: Prior to conducting any operations with this device, a lift study must be undertaken noting the capacity of the device in its various configurations.

Please contact your local Robertsons Lifting and Rigging branch for further technical information and advice.

Warranty:

Returns will be accepted for faulty or defective goods and any other non-excludable obligations of Worksense Workwear and Safety set out in the Trade Practices Act 1974 or similar State and Territory legislation.

Returns are subject to customer following Worksense’s recommended care and maintenance instructions which can be found on the garments swing tag. Worksense Garments found to be faulty will be replaced at no cost.

Items that are sourced from 3rd party distributors will carry their own manufacturer’s warranty.

Returns/Exchange Policy:

Worksense to be notified within 7 days from receipt of order for any products that are to be returned/exchanged.

Before any items are returned the following steps need to be actioned:

  • Complete Return Authorisation Form (RAF)
  • Obtain a Return Authorisation Number
  • Forward the garments with the (RAF) form to the specified Worksense branch
  • Goods will be inspected and credited off your account once approved

Please Note: Worksense Workwear and Safety must approve all returns before they are forwarded back to the designated branch. These authorised returns must be freight prepaid and will only be accepted if they are in a saleable condition. Products specifically purchased, manufactured, machined or cut to size or to your company’s specification are not returnable unless prior approval has been given.

Shipping is free for order over $300 inc GST. All our products are despatched from our warehouses located throughout Australia.

Orders being delivered throughout Australia have a delivery charge of $15 inc GST. This will be confirmed at checkout.

For overseas orders, please send your enquiry to sales@worksense.com.au